0$0.00

No products in the cart.

Sale!

1.44/1.8/2.0/2.2/2.4/2.8 Inch TFT Color Screen LCD Display Module Drive ST7735 ILI9225 ILI9341 Interface SPI 128*128 240*320

$28.99 $14.95

 

 

 

 

 


 

Fast Delivery by 1 Week

Use Paypal Checkout and Save 100% Fee on Transaction

 


 

1.44/1.8/2.0/2.2/2.4/2.8 Inch TFT Color LCD Module

1.44 Inch

With PCB backplane

Dot matrix: 128X128!

Driver: ST7735

Only 4 IOs can drive

1.8 Inch

1.8-inch SPI serial screen with backplane module, requires at least 4 IO drivers

Size: 1.8 inch SPI serial bus

Resolution: 128*160

Driver IC: ST7735

The features of this module:

1. Support Arduino various MCU in-line without any wiring

2. Integrated voltage regulator IC, support 5V or 3.3V power supply

3. Onboard level shifting scheme, truly compatible with 5V/3.3V IO level.

Support a variety of microcontroller IO connections

4. Integrated SD card expansion circuit,

5. Reserve SPI FLASH font circuit to facilitate extended application

2.0 Inch

2.0 inch SPI serial screen with backplane module, at least 4 IO drivers

Size: 2.0 inch SPI serial bus

Resolution: 176*220

Driver IC: ILI9225

The features of this module:

1. Support Arduino various MCU in-line without any wiring

2. Integrated voltage regulator IC, support 5V or 3.3V power supply

3. Onboard level shifting scheme, truly compatible with 5V/3.3V IO level.

Support a variety of microcontroller IO connections

4. Integrated backlight control circuit, can control on-off or PWM dimming,

5. Integrated SD card expansion circuit,

6. Reserve SPI FLASH font circuit to facilitate extended application

Pin Description:

11Pin LCD module interface pin definition:

Vcc: module power supply positive, can input 5V or 3.3V

GND: Module power supply negative, ground

GND: The module power supply is negative, grounded, or can be left floating.

NC: Hanging

NC: Hanging

LED: backlight control pin, connected to high level

CLK: Serial SPI clock signal

SDI: serial spi data input signal

RS: Command (RS = 0) parameter (RS 1) selection

RST: LCD reset signal

CS: liquid crystal chip selection signal

4 Pin Expansion Pin Interface Pin Definition:

SD CS: SD card selection signal

SD_ MOSI: SPI bus MOSI data input

SD_ MISO: SPI bus MISO data output

SD_ SCK: SPI bus serial clock signal

2.2 Inch

Only 5 IO ports (analog SPI), or direct hardware SPI, can be driven, input voltage support 5V/3.3V, ILI9341 driver, resolution 240*320

2.4 Inch

At least 4 IO drivers are required without touch, with a minimum of 9 IO drivers with touch. Resolution 240*320

2.8 Inch

At least 4 IO drivers are required without touch, with a minimum of 9 IO drivers with touch

Resolution 240*320

Dot matrix: 240X320

2.2 inch to 2.8 inch SPI interface screen size comparison

SKU: 33012793224 Category: