0$0.00

No products in the cart.

Sale!

1.44/1.8/2.0/2.2/2.4/2.8 Inch Colorful TFT LCD Screen Display Module SPI Serial Drive ST7735 ILI9225 ILI9341128*128 240*320

$28.99 $14.95

 

 

 

 

 


 

Fast Delivery by 1 Week

Use Paypal Checkout and Save 100% Fee on Transaction

 


 

1.44 Inch

  • With PCB backplane
  • Dot matrix: 128X128
  • Driver: ST7735
  • Only 4 IOs can drive

1.8 Inch

  • 1.8-inch SPI serial screen with backplane module, requires at least 4 IO drivers
  • Size: 1.8 inch SPI serial bus
  • Resolution: 128*160
  • Driver IC: ST7735

Features:

1. Support Arduino various MCU in-line without any wiring

2. Integrated voltage regulator IC, support 5V or 3.3V power supply

3. Onboard level shifting scheme, truly compatible with 5V/3.3V IO level.

Support a variety of microcontroller IO connections

4. Integrated SD card expansion circuit,

5. Reserve SPI FLASH font circuit to facilitate extended application

2.0 Inch

  • 2.0 inch SPI serial screen with backplane module, at least 4 IO drivers
  • Size: 2.0 inch SPI serial bus
  • Resolution: 176*220
  • Driver IC: ILI9225

Features:

1. Support Arduino various MCU in-line without any wiring

2. Integrated voltage regulator IC, support 5V or 3.3V power supply

3. Onboard level shifting scheme, truly compatible with 5V/3.3V IO level.

Support a variety of microcontroller IO connections

4. Integrated backlight control circuit, can control on-off or PWM dimming,

5. Integrated SD card expansion circuit,

6. Reserve SPI FLASH font circuit to facilitate extended application

Pin Description:

11Pin LCD module interface pin definition:

Vcc: module power supply positive, can input 5V or 3.3V

GND: Module power supply negative, ground

GND: The module power supply is negative, grounded, or can be left floating.

NC: Hanging

NC: Hanging

LED: backlight control pin, connected to high level

CLK: Serial SPI clock signal

SDI: serial spi data input signal

RS: Command (RS = 0) parameter (RS 1) selection

RST: LCD reset signal

CS: liquid crystal chip selection signal

4 Pin Expansion Pin Interface Pin Definition:

SD CS: SD card selection signal

SD_ MOSI: SPI bus MOSI data input

SD_ MISO: SPI bus MISO data output

SD_ SCK: SPI bus serial clock signal

2.2 Inch

Only 5 IO ports (analog SPI), or direct hardware SPI, can be driven, input voltage support 5V/3.3V, ILI9341 driver, resolution 240*320

2.4 Inch

At least 4 IO drivers are required without touch, with a minimum of 9 IO drivers with touch. Resolution 240*320

2.8 Inch

At least 4 IO drivers are required without touch, with a minimum of 9 IO drivers with touch

Resolution 240*320

Dot matrix: 240X320

SKU: 4000444194938 Category: